Differences

This shows you the differences between two versions of the page.

--- networkedmetronomes [2024/11/18 15:14] – givan
+++ networkedmetronomes [2024/11/23 08:33] (current) – givan
@@ Line 1: / Line 1: @@
-===== Networked Metronoms =====
+===== Networked Metronomes =====
+==== The idea ====
 A couple of months ago we were asked by Ward Weiss if we wanted to participate in his [[https://www.artsbirthday.net|Art's Birthday]] Project called [[https://planktone.be/planktijd/|Planktijd]].
@@ Line 11: / Line 13: @@
 On the [[https://planktone.be/planktijd/DIY.html]] website it is fully explained how to make one. Of course we could not refuse his beautiful offer!
-Possible and Imaginary Steps:
+==== Possible and Imaginary Steps ====
+  * order the right ESP32
   * solder an ESP32 and relay, install the code and play
   * change/extend the relay with a solenoid that can tick against objects (wood, glass, metal, etc..), and stream that sound online
-  * use this device to make our own rhythms/timings, algorithmically generated but based on the participants from ButtuLab, and use a streambox to transmit this
+  * use this device to make our own rhythms/timings, algorithmically generated but based on the participants from ButtuLab, and use a streambox to transmit this, but that is a matter of sitting together and do some programming sessions, I am sure we can come up with a nice distributed composition!
-  * same thing as above, but this time go outside and play with 'found resonating objects' in nature, and connect/transmit/stream via streamboxes
+  * same thing as above, but this time go outside and play with 'found resonating objects' in nature, and connect/transmit/stream via streamboxes, maybe we could at that moment try to develop a new streambox?
+Some general links and things:
+ESP32 (the newest one is ESP-S3 but that is overkill for this I think). There are many models available, even from Espressif, and keep in mind to check the right pins, the Chinese clones can be quite different, watch out! You need a 38 pin model...
+  * https://dratek.cz/arduino/51547-esp32-devkitc-development-board-38pin.html
+  * https://www.laskakit.cz/iot-esp-32s-2-4ghz-dual-mode-wifi-bluetooth-rev-1--cp2102
+Check the pdf, we can use a transistor and solenoid and make different sounds...
+Solenoids exist in all voltage ranges, we could use the relay above but still you would need extra power externally, to avoid it we look into 3V or 6V
+  * https://www.aliexpress.com/item/1005004982948044.html
+  * https://dratek.cz/arduino/149066-tazny-elektromagnet-6v-20n-jf-0826b.html)
-Let's see how far we get...
+Guides for solenoid 5V (no relay needed?) (esp32 and arduino):
+  * https://www.instructables.com/Control-a-Solenoid-With-a-D1-Mini-Micro-controller/
+  * https://www.adafruit.com/product/2776#description
+  * https://forum.arduino.cc/t/how-to-activate-5v-relay-with-esp32/1218042/3
+  * https://core-electronics.com.au/guides/solenoid-control-with-arduino/
+  * https://bc-robotics.com/tutorials/controlling-a-solenoid-valve-with-arduino/
+  * https://www.circuito.io/app?components=9442,11015,360217
+It's an ESP32 so we can run it on a solar panel, but need a new lipo-rider-pro
+  * https://dratek.cz/martin/7842-napajeci-deska-lipo-rider-pro.html
+I guess we are having a 5V one and also some regulators, keep it easy though using a simple Low-dropout or LDO Regulator MCP1700-3302E ??? check circuitry for connecting to ESP32
+  * https://randomnerdtutorials.com/power-esp32-esp8266-solar-panels-battery-level-monitoring/
+relate the speed to the amount of light?
+  * (LDR) https://esp32io.com/tutorials/esp32-light-sensor
+  * (BH1750) https://randomnerdtutorials.com/esp32-bh1750-ambient-light-sensor/